Halo Bolt Replacement Jumper Cables — Official Accessory
Keep your Halo Bolt portable jump starter ready for emergencies with our official replacement jumper cables. Designed exclusively for Halo Bolt models, these heavy-duty cables feature reinforced copper conductors and industrial-grade clamps that deliver reliable power transfer when you need to jump-start a vehicle.
Whether your original cables were damaged, lost, or you want a backup set in another vehicle, these genuine replacement cables restore full jump-starting capability to your unit. Each set includes protective storage bag and safety instructions to ensure proper use.
Cable specifications & compatibility
Cable Construction & Materials
Our halo bolt replacement jumper cables use pure copper conductors wrapped in heavy-duty PVC insulation that resists cracking in extreme temperatures from -4°F to 140°F. The copper core ensures maximum electrical conductivity during jump-starting operations, while the flexible outer jacket remains pliable in cold weather when batteries most commonly fail.
The industrial-grade steel clamps feature reinforced spring mechanisms that maintain constant pressure on battery terminals throughout the jump-start process. Each clamp jaw is coated with protective PVC that prevents accidental shorting and protects your vehicle’s battery posts from scratches or scoring during connection.
Halo Bolt Model Compatibility
These replacement cables are engineered specifically for the Halo Bolt 57720 and 58830 portable jump starters, ensuring perfect fitment with the proprietary connector port on your unit. The cables will not work with other brands or models of portable jump starters.
Connector Specifications
The charging port connector uses a keyed design that prevents reverse polarity connection to your Halo Bolt. This safety feature protects both the cables and your jump starter unit from damage caused by improper hookup. The connector locks securely into place with an audible click, and the integrated safety tab must be depressed for removal.
What’s Included & Storage
Each replacement cable set includes the complete jumper cable assembly with both positive and negative leads permanently attached to the Halo Bolt connector, a reinforced nylon storage pouch with drawstring closure, and a quick-start safety guide with illustrated jump-starting procedures.
The storage pouch is specifically sized to hold the cables in a loose coil that prevents kinking or conductor damage during storage. We recommend storing the cables in the pouch inside your vehicle trunk or emergency kit rather than leaving them connected to your Halo Bolt unit, as this reduces wear on the connector port.
Essential Halo Bolt Accessories & Replacements
Rated 4.8 by verified buyers
Halo Bolt Replacement Cable Questions
These cables are compatible with Halo Bolt models 57720 and 58830 only. Check the model number printed on the bottom label of your jump starter unit to confirm compatibility.
The cables feature a proprietary connector that will not fit other brands or older Halo Bolt models. If you’re unsure about your model, contact our support team with your unit’s serial number before ordering.
No, these halo bolt replacement jumper cables use a proprietary connector designed exclusively for Halo Bolt 57720 and 58830 models. The connector will not physically fit jump starters from other manufacturers.
The keyed connector design and specific pin configuration ensure these cables only work with compatible Halo Bolt units to prevent damage from incorrect hookups.
First, verify the connector is fully seated in your Halo Bolt unit with an audible click. Check that your Halo Bolt is charged above 25% battery level, as the unit will not attempt a jump start below that threshold.
Inspect both clamps for corrosion or debris and ensure you’re connecting to the correct battery terminals (red to positive, black to negative). If the cables still don’t function, contact our warranty service team as you may have received a defective set.
The halo bolt replacement jumper cables measure 12 feet from the Halo Bolt connector to the furthest clamp tip. This length is sufficient to reach the battery in most sedans, SUVs, and light trucks when the Halo Bolt unit is placed on the ground or nearby surface.
For vehicles with batteries in unusual locations (such as trunk-mounted batteries), you may need to position your Halo Bolt creatively to reach, but the 12-foot length handles the vast majority of jump-start situations.
Yes, these are genuine OEM replacement cables built to the exact same specifications as the factory cables included with new Halo Bolt units. They use identical copper conductor gauge, clamp spring tension, insulation materials, and connector components.
We manufacture these cables in the same facility using the same quality control standards as original equipment, ensuring you get the same reliable performance as your original set.
While the cables can remain connected, we recommend storing them separately in the included pouch to reduce wear on the connector port. Repeated movement and vibration in your vehicle can gradually loosen the connection over time.
Keeping the cables in their storage pouch also prevents the clamps from accidentally contacting metal objects in your trunk or emergency kit, which could create a short circuit if the Halo Bolt is powered on.
The one-year limited warranty covers manufacturing defects including faulty conductors, defective clamps, insulation cracking under normal temperature conditions, and connector failures. The warranty does not cover damage from vehicle electrical surges, physical abuse, improper storage, or exposure to chemicals.
To file a warranty claim, you’ll need your original purchase receipt and photos clearly showing the defect. Our team typically processes warranty replacements within 3-5 business days of claim approval.